Specification | Description |
---|---|
Table Size | 126" x 33.5" |
Load Capacity | 6,600 lbs. |
Spindle Nose-Table Surface | 5.91"-33.46" |
Floor-Table Surface | 42.52" |
Spindle Gage Line-Tilting Center | 13.78" |
Spindle Center-Column Slideway | 36.61" |
Max. Workpiece Height | 17.7" |
Spindle Bore Taper | CAT 50 |
Spindle Speed | 60-12,000 RPM |
Motor | 75 HP |
Front Bearing Diameter | 3.54" |
X-Axis Travel | 120.08" |
Y-Axis Travel | 33.46" |
Z-Axis Travel | 27.56" |
A-Axis Travel | +/- 35" / .001" min. |
B-Axis Travel | =/- 35" / .001" min. |
X-Axis Ball Screw Diameter/Pitch | 2.48" / 0.42" |
Y-Axis Ball Screw Diameter/Pitch | 1.97" / 0.63" |
Z-Axis Ball Screw Diameter/Pitch | 1.97" / 0.47" |
X,Y,Z Axis Thrusts | 3,527 lbs. |
X,Y,Z Axis Positioning Accuracy | +/- 0.002" / 11.81" |
X,Y,Z Axis Repeatability | +/- 0.001" / 3.94" |
A & B Axis Positioning Accuracy | +/- 10 sec. |
A & B Axis Repeatability | +/- 5 sec. |
X, Y, Z Axis Cutting Feedrates | 0.039 - 945 IPM |
A & B Axis Cutting Feedrates | 1-2,400 deg./min. |
X & Y Axis Rapid Traverse | 1,181 IPM |
Z Axis Rapid Traverse | 945 IPM |
A & Ba Axis Rapid Traverse | 3600 deg./min. |
Magazine Capacity | 30 Tools |
Tool Shank | CAT 50 |
Max. Tool Weight | 44 lbs. |
Coolant Tank Capacity | 396 gal. |
Floor Space | 28.22' x 14.93' |
Height | 10.83' |
Weight | 44,000 lbs. |
Machinery Trade In | ACT
2424 Cypress Way
Fullerton, California 92831
714-441-1992
714-441-1923
sales@machinerytradein.com